Moses Vento 790 $1150

[Michael]

Great first windfoil. Comes with plate (used once) and tuttle connector. You can wing with it as well and if you get the fuse below it will be even better for winging. Has a bit of corrosion on the fuse. A few nicks on the wing which I repaired with epoxy. The 450 Stab is hardly used.
All the specs are here....
https://www.sailworks.com/the-gear/foiling/windfoils/moses-vento-alloy-windfoil.html

https://www.mackiteboarding.com/custom-moses-super-fuse-surf-fuselage/

https://www.sailworks.com/the-gear/foiling/accessories-parts/moses-sabfoil-alloy-mast-plate-head.html

IMG_5131.jpg (1.63 MiB) Viewed 3656 times

IMG_5134.jpg (702.09 KiB) Viewed 3656 times

IMG_5139.jpg (1.09 MiB) Viewed 3656 times

IMG_5141.jpg (637.72 KiB) Viewed 3656 times

[Alton]

Hey Michael - are you ditching wind foiling for wing foiling?

[Michael]

Hey Michael - are you ditching wind foiling for wing foiling?

Yup, once I started winging I never really wanted to wind foil again. Haven't used this in over a year, so I hope someone else can get into foiling with it.

[Michael]

Great first windfoil. Comes with plate (used once) and tuttle connector. You can wing with it as well and if you get the fuse below it will be even better for winging. Has a bit of corrosion on the fuse. A few nicks on the wing which I repaired with epoxy. The 450 Stab is hardly used.
All the specs are here....
https://www.sailworks.com/the-gear/foiling/windfoils/moses-vento-alloy-windfoil.html

https://www.mackiteboarding.com/custom-moses-super-fuse-surf-fuselage/

https://www.sailworks.com/the-gear/foiling/accessories-parts/moses-sabfoil-alloy-mast-plate-head.html

IMG_5131.jpg

IMG_5134.jpg

IMG_5139.jpg

IMG_5141.jpg