by adam2 » Fri Jun 28, 2019 2:27 pm
Michael,
What foil are you going to be using with the PowerPlate? I just ask because the bolts that came with mine to attach the foil's base plate to the PowerPlate were intended for a Slingy foil base plate, and I used a Foil Works that despite being a Slingy clone, is slightly thinner. The result was that the bolts put some dimples on my board base. I spoke to Dave at Windance about it and he set me up with some slightly shorter bolts. It's just something to think about to keep your board base looking good. Good luck!