Slappy wrote:Did you replace it with a U-stick valve?
I had to replace my 10m inflate with one and then replace that with another U-stick a year later.
I found a 2 mm hole in the valve flange through to the bladder. I cut out a donut shape out of tear-aid and sealed the entire flange.
Lucky it was a simple job. Found the leak with a spray bottle of water with dish washing detergent. Only had to pull the bladder out 3 feet through the zipper.
I considered using the "Valve Trap" but that was my last resort since it covers a huge part of the bladder (4" diameter circle) and is irreversible.
If the leak returns, I'll try sealing the hole with "Seam Grip" - recommended by Brad from White Rock who finished some major repairs to his Blade Trigger after landing his kite into a thorn bush
Next would be a replacement valve then last resort would be the Valve Trap.
