Paint or repair?

[tweegster]

I have not used the blanks, but they looked good. I chose to make my own from scratch as it was $10 vs $150

This was due to it being a smallish pocket foil. Naturally, I then went and spent 5 hours making a huge mess building the blank...so... I would probably buy a blank for a larger board.

I am currently working on a divinycell h80 cored 105cm carbon pocket foil. I gorilla glued two sheets together to build and set the rocker....

[shmish]

If you dont have any handy, use a small patch of 4oz glass and mix some microballons or cabosil into your resin 50% by volume. Will make it white opaque, but sand much much easier.

I thought I had microballoons but it looks like I used them all up. I still have microfibers which won’t finish as smooth, I’ve never tried a finishing coat with microfibres. Do you think it would work ok? I guess it won’t matter too much since the whole thing is a bit Frankenstein as I won’t be blended colours in.

[telus022420]

I take it you got inspiration from this guy. Gooooood Luck.
Part 1 of ???
https://youtu.be/cI7uOvrxnyM

Lots of part for the complete board.